stitch and glue boat reddit
I see that geodesic boats has a 14' canoe plan available which looks pretty good, and i have seen several selway fisher boats that look appropriate aswell (the christine, the 14' prospector, 14' huntsman, etc.) i dont know of any other plywood stitch glue plans that are well regarded. anyways, for a beginer, any suggestions on where to start?. On a small boat (say <20'), i don't stitch. options: a) if you have any inner structure just use an air nailer ($25 at harbor freight) to hold it all together until the glue dries . i usually have 1/4 or 1/2 plywood with some chine logs and ribs or bulkheads.. For small boats, the stitch and glue method can be built on a pair of sawhorses in one bay of a household garage. for larger boats, the construction mold is designed into the actual boat. the parts that ensure you build a straight and fair boat are the same parts that become permanent elements of the unified structure, yielding an exceptionally. 
stitch and glue boat reddit They scale down well for small boat builds. they draft super shallow, making them easy to handle in lakes, rivers, and shores. based on my research, cats require very lightweight construction, so stitch-and-glue is my preferred technique (it conveniently also looks like the easiest).. The problem with using polyurethane glue for stitch and glue has always been the bubble effect coursed during the curing process, then the endless sanding to smooth and fair up. now using the p-2 system of stitch and glue it avoids the problem by using a fillet made from a polyurethane tube and glue gun and a fairing coat achieved by waterproof.
