boat planking wood
Installing planks on a wooden boat - duration: 6:22. william flannery - marine surveyor 776 views. 6:22. 12 year old boy humiliates simon cowell - duration: 5:37.. Maritime wood products can supply all of your wood needs for hull construction, including the following products: speed strip is the ultimate strip planking material for many applications in boat building, repair and restoration. it is the fastest, easiest way to build a strong, rigid, lightweight wooden structure.. The planks may be mechanically connected to each other with copper rivets, bent over iron nails, screws or in modern boats with adhesives. often, steam bent wooden ribs are fitted inside the hull. strip planking is yet another type of wooden boat construction similar to carvel. it is a glued construction method which is very popular with. 
boat planking wood Place the soaked wood plank onto the boat hull, following the curves of the hull. apply a hot iron to the plank as you bend it in place. the heat from the iron will help you mold the plank to the hull. clamp the plank into place at both ends and in the center. allow the plank to dry completely in place.. 6. deck planking . mark a centre line down the deck and plank from this line to the sides (―bulwarks‖). ideally, the planks should be cut into 100mm lengths with the joint staggered so that they are in line only every 3 or 4 planks. an alternative to laying short lengths of planking is to lay full lengths and score the joints with a knife.
