strip plank boats
This was going to be the supply for strip planking my hull, so claw hammers and crowbars went into action to salvage these tongue-and-groove boards before the building was demolished. we then had the challenge of converting these boards into 3/8 inch (12mm) bead and cove strips: ensuring all the fastenings were removed before cutting, scarfing. Strip planking boat construction definition of strip planking, ancient and new. strip building of boats has been around for a long time. in the past large boats were carvel planked with heavy boards attached to solid ribs using sturdy fasteners or wood dowels.. Traditionally planked boats cannot be successfully fiberglassed. the planks will move and something has to give. strip planking avoids this by using narrow strips with rigid glue bonds. for fiberglassing to be successful, the inside of the hull must be well sealed.. 
strip plank boats With our strip-planked hull faired and the outside stem attached, there are many techniques that could turn these strips into a boat. strip-planking may have been the first step after the dugout in the evolution of boatbuilding techniques; the way the quality of wood is going, it might be the last to survive.. Strip planking 16: removing white glue lines [video] strip planking 17: the cotton swab test [video] strip planking 18: trimming off the excess glass [video] strip planking 19: releasing forms in staple free construction [video] strip planking 20: installing a center accent line on the deck [video] strip planking 21: stripping the back deck [video].
